Rewiring a house in Dallas-Fort Worth costs $6.50–$12.40 per square foot, so a typical 1,500 sq ft home runs $9,750–$18,600 and a 2,500 sq ft home $16,250–$31,000, including copper wiring, new outlets and switches, panel work, permits, and inspection.
2026 rewiring prices by home size
| Home size | Typical installed cost |
|---|---|
| 1,000 sq ft | $6,500 – $12,400 |
| 1,500 sq ft | $9,750 – $18,600 |
| 2,000 sq ft | $13,000 – $24,800 |
| 2,500 sq ft | $16,250 – $31,000 |
| 3,000 sq ft | $19,500 – $37,200 |
Those numbers land between $6.50 and $12.40 per square foot, and they include the copper wiring, new outlets and switches, panel work, the electrical permit, and the final inspection. The wire itself is not the expensive part — it is a licensed electrician pulling it through your walls, attic, and crawl space, then landing every circuit correctly in a panel that can actually protect your home.
What drives the price up or down
Two homes of identical square footage can rewire at very different prices. These are the variables that move the quote:
- Attic and crawl space access — open, unfinished attics and crawl spaces are fast. Finished ceilings and slab foundations mean more fishing and more access holes.
- Panel condition — if your panel is a Federal Pacific or Zinsco, a rewire quote almost always includes replacing it, because no licensed electrician will land new copper circuits on a panel that cannot trip.
- Fixture and outlet count — more outlets, switches, recessed lights, and ceiling fans means more boxes, more terminations, and more labor.
- Wall construction — drywall is quick to patch; plaster-and-lath or paneling is slower and costs more to restore.
- Permits and inspections — every DFW city requires a permit, and inspection timelines vary by municipality.
Signs your home needs rewiring
Not every old home needs a full rewire. But if you see any of these, it is time to get the wiring evaluated:
- Cloth-sheathed cable — the rubber insulation under the cloth degrades and crumbles, exposing live conductors.
- Two-prong outlets — a sign the home has no grounding, which is both a safety risk and a code failure.
- Aluminum branch circuits — common in DFW homes built 1965–1973; aluminum oxidizes, loosens at connections, and is a known fire risk.
- Pre-1980 build date — homes this age often mix knob-and-tube, cloth Romex, and undersized circuits that cannot handle modern loads.
- Frequent breaker trips or flickering lights — your circuits are overloaded or connections are failing.
Get an exact rewire price for your home.
Written flat-rate quote, permit included.
Rewiring cost FAQs
$9,750–$18,600 in Dallas-Fort Worth, or $6.50–$12.40 per square foot. That includes copper wiring, new outlets and switches, panel work, the electrical permit, and inspection.
Yes, in most homes. Electricians fish new cable through the attic, crawl space, and existing stud cavities, cutting only small access holes that are patched afterward. Full wall demolition is rarely needed except in homes with solid plaster walls and no accessible attic or crawl space.
5–8 business days for a 1,000–1,500 sq ft single-story home, 8–14 days for a 1,500–2,500 sq ft home, and 12–18+ days for larger two-story homes. Historic plaster homes can add 30–50% to the timeline.
Generally no — most policies treat rewiring as preventive maintenance, not a covered loss. But some insurers will require a rewire or drop coverage over cloth-sheathed cable or aluminum branch circuits, so the work often protects your insurability even when it is not reimbursed.
It is worth it. Buyers and inspectors flag old wiring immediately, so you either pay for it through a reduced sale price or do the rewire yourself and market the home as move-in ready. Rewiring also removes the fire risk of cloth-sheathed or aluminum wiring while you still live there.
